Guides

What a septic inspection includes

Last checked November 19, 2026

What EPA, Maryland, New Jersey, Massachusetts, and Washington say a septic inspection should cover, and what usually is not included.

"Septic inspection" can mean very different things, from a quick look at the lid to a full evaluation with the tank pumped and the drainfield tested. Here is what published official guidance says a proper inspection involves.

EPA's typical inspection

EPA's frequently-asked-questions page describes a typical inspection as including:[1]

EPA's separate homebuyer guide gives a shorter list of the same items.[2]

Maryland: four components

Maryland's Department of the Environment recommends that a property-transfer inspection have four components: a file search (records at the local health department), an interview with the homeowner or occupant, the site and system inspection, and a written report.[3] It notes that how many people live in the house, whether it is vacant, and whether the system is only used seasonally all affect how the system's performance should be judged.[3] Its inspection section calls for checking that tanks are structurally sound and watertight, that baffles are present, that liquid levels match the design, and that nothing is discharging to the ground surface.[3] It also says some excavation is usually necessary, because not every component has ready access.[3]

New Jersey: the most detailed public protocol

New Jersey's DEP guidance, written with industry committee input, is a step-by-step manual for inspectors doing real-estate inspections. It says a proper inspection involves gathering records, interviewing the owner, examining each component, pumping every tank so its condition can be seen, checking pumps and controls, and, when conditions warrant, a hydraulic load test.[4] The same guidance is clear about limits: its inspection is "not a warranty or guarantee," and inspectors may not declare a system malfunctioning or failed, because that determination belongs to the local health department or the state.[4]

Massachusetts: a required minimum

Under Massachusetts' Title 5, an inspection must at minimum locate and inspect the cesspool or septic tank and the distribution box, and the inspector must make reasonable efforts to find other components. If something cannot be inspected, the inspector must say why on the form.[5] Only MassDEP-approved inspectors may do it, and they must use MassDEP's form.[5]

Washington: written minimums

Washington's rule says a property-transfer inspection must include, at minimum, an inspection and evaluation of all sewage tanks (baffles, effluent filters, tank contents such as water level, scum, sludge, solids, water tightness, and structure), all lids, accesses, and risers, the system and reserve area for signs of failure, and other components such as distribution boxes. It also requires a review of the record drawing and any previous reports.[6] Washington's inspection requirement at property transfer takes effect February 1, 2027.[7]

What is often left out

Questions to ask an inspector before you hire

This page is a reading of official and reputable published pages, not legal, lending, or engineering advice. Septic rules are set by states, counties, and local health departments, and they change. Confirm anything that affects a sale or a loan with your local health department, your lender, and your closing attorney or agent.