State rules / Washington
Washington septic property transfer inspection (starts February 1, 2027)
Last checked November 19, 2026
Washington's on-site sewage rule adds a property transfer inspection requirement effective February 1, 2027, authorized by local health officers. What the rule says and what applies before then.
Short version: Washington's State Board of Health adopted revisions to chapter 246-272A WAC, the on-site sewage system rule, on January 10, 2024, with staggered effective dates. The Department of Health says the property transfer inspection requirement takes effect February 1, 2027.[1] As of November 19, 2026, that date has not arrived.
What the rule says
At the time of property transfer, WAC 246-272A-0270(1)(k) says the owner must provide the buyer all available maintenance and repair records along with the completed seller disclosure statement under chapter 64.06 RCW for residential transfers. Beginning February 1, 2027, the owner must also obtain an inspection by a third-party inspector authorized by the local health officer, and an inspection of any proprietary treatment products per manufacturer recommendations.[2]
The local health officer may:[2]
- remove the inspection requirement at transfer if the local health jurisdiction has evidence that the system is in compliance with the periodic-inspection requirement and was inspected by an authorized third-party inspector
- verify the results of the inspection
- require additional inspections and other requirements
The results must be submitted to the local health jurisdiction on an approved form, and the local health officer may require a compliance schedule for repairing a failure found in the inspection.[2]
What the inspection must include
At minimum: inspection and evaluation of all sewage tanks (baffles, effluent filters, tank contents such as water level, scum, sludge, and solids, water tightness, and general structure), all lids, accesses, and risers, the system and reserve area for indicators of failure or conditions that may affect function or repair, and other components such as distribution boxes. It also includes a review of the record drawing and related documents and, for proprietary products, the procedures in the accepted operations and maintenance manual.[3] The report must include the property address, inspection date, the permitted type and design flow for known systems, and verification that the record drawing is accurate or a site plan showing system components relative to structures and site features.[3]
Routine inspections already required
Under WAC 246-272A-0270(1)(e), owners must obtain an inspection by an authorized maintenance service provider at least once every three years for systems consisting only of a tank and gravity drainfield, and annually for other systems, unless the local health officer specifies more often.[2] See how often to pump a septic tank.
What this page does not cover
Washington's local health jurisdictions (county and district health departments) administer the program, and they may have their own earlier transfer requirements; we did not verify those. Contact the health department for the county where the house sits. For Washington well water, see the sister site's Washington private well testing guide. See also septic inspection when buying a house.
Sources
Every page below was fetched on November 19, 2026. If an official page has since changed, the official page wins.
This page is a reading of official and reputable published pages, not legal, lending, or engineering advice. Septic rules are set by states, counties, and local health departments, and they change. Confirm anything that affects a sale or a loan with your local health department, your lender, and your closing attorney or agent.